Mac-Address (Interface View) - HP 3600 v2 Series Command Reference Manual

Dynamic Multicast
Static Multicast
Total Multicast
Table 15 Command output
Field
MAC TYPE
LEARNED
USER-DEFINED
SYSTEM-DEFINED
IN-USE
AVAILABLE

mac-address (interface view)

Syntax
mac-address { dynamic | static } mac-address vlan vlan-id
undo mac-address { dynamic | static } mac-address vlan vlan-id
View
Layer 2 Ethernet interface view, Layer 2 aggregate interface view
Default level
2: System level
Parameters
dynamic: Specifies dynamic MAC address entries. These entries can age.
static: Specifies static MAC address entries. They do not age, but you can add or remove them.
mac-address: Specifies a MAC address in the format of H-H-H, where 0s at the beginning of each H
(16-bit hexadecimal digit) can be omitted. For example, inputting "f-e2- 1 " indicates that the MAC
address is 000f-00e2-0001.
vlan vlan-id: Specifies an existing VLAN to which the Ethernet interface belongs, where vlan-id is the
specified VLAN ID, in the range of 1 to 4094.
Description
Use mac-address to add or modify a MAC address entry on a specified interface.
Use undo mac-address to remove a MAC address entry on the interface.
0 0
0 0
Description
MAC address type:
•
Dynamic Unicast
•
Static Unicast
•
Total Unicast
•
Dynamic Multicast
•
Static Multicast
•
Total Multicast
Dynamically learned MAC addresses
User defined MAC addresses (dynamic and static)
MAC addresses generated by the system (for example, 802.1x and MAC
authentication)
Number of existing MAC addresses of a specific type
Maximum number of MAC addresses supported by the system
65
0 0
2 2
2
256
256