Stp Config-Digest-Snooping; Stp Cost - HP 3600 v2 Series Command Reference Manual

stp config-digest-snooping

Syntax
stp config-digest-snooping
undo stp config-digest-snooping
View
System view, Ethernet interface view, port group view, Layer 2 aggregate interface view
Default level
2: System level
Parameters
None
Description
Use stp config-digest-snooping to enable Digest Snooping.
Use undo stp config-digest-snooping to disable Digest Snooping.
The feature is disabled by default.
Configured in system view, the setting takes effect globally.
Configured in Ethernet interface view, the setting takes effect on the interface only.
Configured in port group view, the setting takes effect on all ports in the port group.
Configured in Layer 2 aggregate interface view, the setting takes effect only on the aggregate interface.
Configured on a member port in an aggregation group, the setting takes effect only after the port leaves
the aggregation group.
Enable this feature both globally and on ports connected to other vendors' devices to make it effective.
To minimize impact, enable the feature on all associated ports before you enable it globally.
Related commands: display stp.
Examples
# Enable Digest Snooping on Ethernet 1/0/1 and then globally.
<Sysname> system-view
[Sysname] interface ethernet 1/0/1
[Sysname-Ethernet1/0/1] stp config-digest-snooping
[Sysname-Ethernet1/0/1] quit
[Sysname] stp config-digest-snooping

stp cost

Syntax
stp [ instance instance-id | vlan vlan-list ] cost cost
undo stp [ instance instance-id | vlan vlan-list ] cost
View
Ethernet interface view, port group view, Layer 2 aggregate interface view
129