Isolate-User-Vlan Enable - HP 3600 v2 Series Command Reference Manual

View
System view
Default level
2: System level
Parameters
isolate-user-vlan-id: Specifies an isolate-user-VLAN ID, in the range of 1 to 4094. Do not specify VLAN
1 for this argument.
secondary secondary-vlan-id1 [ to secondary-vlan-id2 ]: Specifies a secondary VLAN ID or a secondary
VLAN ID range. The secondary-vlan-id1 and secondary-vlan-id2 arguments represent secondary VLAN
IDs and each range from 1 to 4094. The secondary-vlan-id2 argument cannot be smaller than the
secondary-vlan-id1 argument. Do not specify VLAN 1 for the secondary-vlan-id1 or secondary-vlan-id2
argument.
Description
Use isolate-user-vlan to associate an isolate-user-VLAN with the specified secondary VLANs.
Use undo isolate-user-vlan to remove the association.
By default, an isolate-user-VLAN is not associated with any secondary VLAN. .
The undo isolate-user-vlan command without the secondary secondary-vlan-id1 [ to secondary-vlan-id2 ]
option specified removes the association between the specified isolate-user-VLAN and all its secondary
VLANs.
The undo isolate-user-vlan command with the secondary secondary-vlan-id parameter specified only
removes the association between the specified isolate-user-VLAN and the specified secondary VLANs.
Do not configure the default VLAN (VLAN 1) as a secondary VLAN or isolate-user-VLAN.
Related commands: display isolate-user-vlan.
Examples
# Associate isolate-user-VLAN 2 with secondary VLANs VLAN 3 and VLAN 4.
<Sysname> system-view
[Sysname] vlan 2
[Sysname-vlan2] isolate-user-vlan enable
[Sysname-vlan2] port ethernet 1/0/2
[Sysname-vlan2] vlan 3
[Sysname-vlan3] port ethernet 1/0/3
[Sysname-vlan3] vlan 4
[Sysname-vlan4] port ethernet 1/0/4
[Sysname-vlan4] quit
[Sysname] isolate-user-vlan 2 secondary 3 to 4

isolate-user-vlan enable

Syntax
isolate-user-vlan enable
undo isolate-user-vlan enable
197