Table of Contents
Advertisement
Measure
•
Click or tap the input field of Count and use the pop-up numeric keypad to set
the count value. Its range is from 2 to 100000. Its default value is 1000.
•
Click or tap the icon
label to unfold the statistics result to display all the measurement statistics items.
Click or tap the icon
10.4
Remove the Measurement Results
This oscilloscope allows you to delete the measurement results of the parameters.
•
In the Setting menu, click or tap Remove to delete the currently selected
measurement item that you've added. Each time you click or tap this button,
only one item will be deleted. Each time when one measurement item is selected
to be removed, the item following the deleted one under the result list will be
moved up.
•
Click or tap Remove All to delete all the displayed measurement items.
•
Click or tap to select the measurement item and drag it to the right to delete it
quickly.
10.5
Auto Measurement
When the oscilloscope is correctly connected and has detected a valid input signal,
click or tap the function navigation icon
select the Auto icon to enable the waveform auto setting function and open the auto
setting function menu.
•
Click or tap the first icon, and then the single period of the signal is displayed
automatically on the screen. Meanwhile, the system will make measurements for
the "period" and "frequency" of the currently displayed waveforms in a single
period. The measurement results are displayed at the right side of the screen
under the "Result" list.
•
Click or tap the second icon, and then multiple periods of the signal are
displayed automatically on the screen. Meanwhile, the system will make
measurements for the "period" and "frequency" of the currently displayed
waveforms in a multiple periods. The measurement results are displayed at the
right side of the screen under the "Result" list.
•
Click or tap the third icon, and then one rising edge of the signal is displayed
automatically on the screen. Meanwhile, the system will make measurements for
DS70000 User Guide
174
at the lower-right corner of the measurement statistics
to fold the measurement statistics label.
at the lower-left corner of the screen to
Copyright ©RIGOL TECHNOLOGIES CO., LTD.
All rights reserved.
Advertisement
Table of Contents
