Xcommand Audio Vumeter Stop; The Bookings Commands; Xcommand Bookings Clear - Cisco TelePresence System Codec C90 Reference Manual

Cisco TelePresence System Codec C90
Contents Introduction

xCommand Audio Vumeter Stop

Stop collecting VU meter information for connector given by type and ID.
Requires user role: USER
Parameters:
ConnectorType(r): <HDMI/Line/Microphone>
ConnectorId(r): <1..8>
Example:
xCommand Audio Vumeter Stop ConnectorType: Microphone ConnectorId: 1
*r AudioVumeterStopResult (status=OK):
** end
D14641.06 Codec C90 API Reference Guide TC5.0 November 2011.
© 2010-2011 Cisco Systems, Inc. All rights reserved.
About the API xConfiguration

The Bookings commands

xCommand Bookings Clear

78
xCommand xCommand
Clear the current stored list of bookings.
Requires user role: USER
Example:
xCommand Bookings Clear
** end
OK
API Reference Guide
xStatus Appendices
www.cisco.com