Xcommand Audio Vumeter Stop; Xcommand Audio Vumeter Stopall; Bookings Commands; Xcommand Bookings Clear - Cisco TelePresence SX20 Codec Reference Manual

Cisco TelePresence SX20 Codec

Introduction

xCommand Audio VuMeter Stop

Stop the VU meter on the specified connector. You have to specify both the connector's type
and number (ConnectorType, ConnectorId) to uniquely identify the connector.
Requires user role: ADMIN, USER
USAGE:
xCommand Audio VuMeter Stop ConnectorID:
ConnectorType
where
: Integer (1..2) for Microphone; Integer (1..1) for Line
ConnectorID
Select a connector number. Together with the ConnectorType it uniquely identifies the
connector.
: Line/Microphone
ConnectorType
Select the connector type.

xCommand Audio VuMeter StopAll

Stop all VU meters.
Requires user role: ADMIN, USER
USAGE:
xCommand Audio VuMeter StopAll
SX20 Codec API Reference Guide CE9.1, JUNE 2017.
D15316.07
About the API xConfiguration
ConnectorID ConnectorType:
xCommand xCommand

Bookings commands

xCommand Bookings Clear

Clear the current stored list of bookings.
Requires user role: ADMIN, USER
USAGE:
xCommand Bookings Clear

xCommand Bookings Get

Get the booking information for a specific ID.
Requires user role: ADMIN, USER
USAGE:
xCommand Bookings Get Id: "Id"
where
: String (0, 128)
Id
The booking ID of a call or conference.
95
API Reference Guide
xStatus Appendices
Copyright © 2017 Cisco Systems, Inc. All rights reserved.