Xstatus Network 1 Ipv6 Gateway; Xstatus Network 1 Mtu; Xstatus Network 1 Vlan Voice Vlanid; Xstatus Network Cdp Platform - Cisco TelePresence SX20 Codec Reference Manual

Cisco TelePresence SX20 Codec
Contents Introduction

xStatus Network 1 IPv6 Gateway

Shows the address of the IPv6 gateway.
Value space of the result returned:
<String>
Example:
xStatus Network 1 IPv6 Gateway
*s Network 1 IPv6 Gateway: ""
** end

xStatus Network 1 MTU

Shows the MTU (Maximum Transmission Unit) size for the network.
Value space of the result returned:
<Integer>
Example:
xStatus Network 1 MTU
*s Network 1 MTU: 1500
** end

xStatus Network 1 VLAN Voice VlanId

The feedback shows the VLAN Voice ID; or Off if the VLAN Voice Mode is not enabled.
Value space of the result returned:
<"Off"/"1".."4094">
Example:
xStatus Network 1 VLAN Voice VlanId
*s Network 1 VLAN Voice VlanId: "Off"
** end

xStatus Network CDP Platform

Returns the hardware platform name of the switch connected to the endpoint.
Value space of the result returned:
<String>
Example:
xStatus Network CDP Platform
*s Network 1 CDP Platform: "cisco WS-C3750X-48P"
** end
SX20 Codec API Reference Guide TC7.0, JANUARY 2014.
D14949.08
About the API xConfiguration

xStatus Network CDP Version

xStatus Network CDP Capabilities

xStatus Network CDP DeviceId

160
xCommand
Returns information about the software release version the switch is running.
Value space of the result returned:
<String>
Example:
xStatus Network CDP Version
*s Network 1 CDP Version: "Cisco IOS Software, C3750E Software (C3750E-
UNIVERSALK9-M), Version 15.0(1)SE2, RELEASE SOFTWARE (fc3)*Technical
Support: http://www.cisco.com/techsupport*Copyright (c) 1986-2011 by Cisco
Systems, Inc.*Compiled Thu 22-Dec-11 00:05 by prod _ rel _ team"
** end
Describes the functional capability for the switch in form of a device type. See documentation for
CDP protocol for more information.
Value space of the result returned:
<String>
Example:
xStatus Network CDP Capabilities
*s Network 1 CDP Capabilities: "0x0029"
** end
Identifies the name of the switch in form of a character string.
Value space of the result returned:
<String>
Example:
xStatus Network CDP DeviceId
*s Network 1 CDP DeviceId: "123456.company.com"
** end
API Reference Guide
xStatus xStatus Appendices
Copyright © 2014 Cisco Systems, Inc. All rights reserved.