Storage - ADT DVR7800S-U Series User Manual

Hybrid Standalone DVR User Guide

4.7.4 Storage

4.7.4.1 Schedule
In the Schedule screen you can add or remove scheduled recordings. Select the appropriate tab for
whether you want to record video or take a snapshot picture.
Schedule Record
There are four recording modes: Regular (auto), Motion Detect, Alarm and Motion Detect with Alarm.
Make sure you have enabled the corresponding record mode in the Setup > Storage > Conditions.
You can view the current time period setup from the color bar.
Green represents general recordings and snapshots
Yellow represents motion detect recordings and snapshots
Red represents alarm recordings and snapshots
Blue represents motion detect with alarm recordings and snapshots
Options
 Channel. Select the desired channel number. Select All if you want to set for all channels.
 Pre-record. The system can pre-record the video before the event occurs into the file. The
value ranges from 1 to 30 seconds depending on the bit stream.
 Redundancy. The system supports a redundancy backup function, which enables you to
back up a recorded file in two disks. Highlight Redundancy to activate this function.
DVR7800S-U Series Hybrid DVR User Guide
Figure 4-74
4 Web Service
217