ADT DVR7800S-U Series User Manual page 243

Hybrid Standalone DVR User Guide
4.7.6.3 Video Matrix
When an alarm occurs while this feature is enabled, the device connected to the SPOT OUT port on
the rear of the DVR displays video output from the selected channel(s) in a single-window spot tour.
In the Video Matrix dialog you can set the matrix output channel and its interval.
Select the appropriate tab, BNC or HDMI, and then set up Video Matrix in the same manner as the
Tour function described above on page 228.
DVR7800S-U Series Hybrid DVR User Guide
Figure 4-91
4 Web Service
233