Table of Contents
Advertisement
Hybrid Standalone DVR User Guide
Enable
Check the box to enable the Tampering function. Then select a channel from the dropdown list.
Period
This feature activates the Tampering function for the specified periods.
To set the Diagnosis period:
1. Click the Setup button.
2. In the resulting setup dialog, select a day of the week from the dropdown menu.
3. For the selected day, check the box for one of the six 24-hour time periods and set the
corresponding recording range.
4. Repeat for other time periods if desired.
5. Click Save. The system reverts to the Tampering page.
Alarm Out
Check the box to enable the external alarm when the event triggers. In the boxes to the immediate
right, enable which camera(s) will record when the event occurs.
Latch
Select the time in seconds that the system delays after the external alarm has ended before turning
off the alarm and the activated output. This feature sets a postponement period before another
external alarm can be activated. Value ranges from 10 to 300 seconds.
Record Channel
The system automatically activates to record selected channels once a motion detection alarm
occurs. Check the box to enable, and the click the buttons for the channels that you want recorded.
The selected channels are highlighted.
Delay
To avoid rerecording the same event, enter the number of seconds to wait after the event has ended
before a new recording can begin. This value ranges from 10s to 300s.
DVR7800S-U Series Hybrid DVR User Guide
Figure 4-58
4 Web Service
200
Advertisement
Table of Contents
