ADT DVR7800S-U Series User Manual page 145

Hybrid Standalone DVR User Guide
3.7.8.2 Add/Modify User
To add a new user:
1. Click the Add User button in the Account screen. The Add User dialog appears.
2. Enter the User name
Note:
•
The maximum length for the user name string is 6-bytes.
•
The string can include letters, numbers, underscore, minus sign and period.
•
The underscore must be in the middle of the string, not at the front or end of the string.
3. Enter the user password in the Password and Confirm fields.
4. If desired, enter an optional Memo describing this user.
5. Enter the user MAC address, in 2-digit 0-f format. The system only saves lower case
characters even you input the capitalized one (f instead of F).
When you add a new user, input the MAC address of the current user. Only the user of the
same MAC address can access the device remotely. (MAC address is for the device of the
same LAN.) If you leave the MAC address item blank when you add a new user, the user of
any MAC address can access the device remotely. You can set or change the MAC address
when you add or modify a user. The MAC address function is also valid for PSS login.
6. Select the Group this user belongs to from the dropdown list.
7. Select the corresponding rights for the current user.
8. Click Save.
It is recommended that the user rights are set lower than the administrative rights.
DVR7800S-U Series Hybrid DVR User Guide
Figure 3-98
3 Local Menu Operations
135