Table of Contents
Advertisement
Hybrid Standalone DVR User Guide
4. Here you can set offset value, length and title according to your communication protocol and
data package.
Note: Having six Frame ID groups can help ensure validity of the information.
5. Click Save.
6. Select the Overlay Mode from the dropdown: Preview or Encode.
7. Select the Overlay Position: Top Left, Top Right, Bottom Left or Bottom Right.
8. Click Save.
To setup Text Overlay in Network Mode without the protocol:
1. Select the Net tab.
2. For Protocol, select POS from the dropdown menu.
3. For Setting, click the IP Setting button.
4. In the dialog that appears, set the Source IP and Destination IP and click Save.
Source IP refers to host IP address that sends out information, which is usually the device
host. The Destination IP refers to other systems that receive the information.
5. Select the Overlay Channels on which to apply the overlay.
6. Select the Overlay Mode: Preview or Encode.
7. Select the Overlay Position from the driopdown: Top Left, Top Right, Bottom Left or Bottom
Right.
8. Click Save.
DVR7800S-U Series Hybrid DVR User Guide
Figure 4-97
4 Web Service
238
Advertisement
Table of Contents
