Table of Contents
Advertisement
Hybrid Standalone DVR User Guide
The following MTU values are for reference only.
•
1500: This is the Ethernet information packet maximum value and the default. It is the typical
setup when there is no PPPoE or VPN. It is also the default setup of some routers, switches
and network adapters.
•
1492: Recommended value for PPPoE.
•
1468: Recommended value for DHCP.
IP Version
Select the IP version: Only IPV4 is valid at his time.
IP Address
Use the keyboard to input the IP address and then set the corresponding Subnet Mask and the
Default Gateway.
Preferred DNS
Displays the DNS IP address.
Alternate DNS
Displays the alternate DNS IP address.
LAN Download
If enabled. The system can process the downloaded data, resulting in increased download speeds of
1.5X to 2.0X.
Note:
•
When you select the DHCP mode to auto search, the IP Address, Subnet Mask and Gateway
fields are removed.
•
If you select Static mode, you manually set the IP Address, Subnet Mask and Gateway.
•
If you select DHCP mode, you can view the IP Address, Subnet Mask and Gateway from the
DHCP.
•
If you switch from the DHCP mode to the Static mode, you must reset the IP parameters.
•
IP Address, Subnet Mask, Gateway and DHCP are read-only when the PPPoE dial is OK.
DVR7800S-U Series Hybrid DVR User Guide
4 Web Service
172
Advertisement
Table of Contents
