ADT DVR7800S-U Series User Manual page 216

Hybrid Standalone DVR User Guide
Enable
Check the box to activate the Alarm function, and then select the channel number from the
dropdown, or else select All.
Alarm Name
Assign a nickname for the specified alarm.
Period
Click the Setup button. The Setup dialog opens. Here you can set the time period when detection is
enabled.
Select Sunday to Saturday from the dropdown list. Be sure to check the box to the left of the period
to enable it. To set your own business day and non-business days, select work day or non-work day
from the dropdown list, and then click the Setup button. For example, you can set Monday to Friday
as working days and Saturday and Sunday as non-working days. Click the Save button when
finished.
Record Channel
Select the proper channel to record when the alarm occurs. Make sure to also set alarm record in the
schedule screen and select Schedule Record on the Manual Record screen.
Delay
To avoid rerecording the same event, enter the number of seconds to wait after the event has ended
before a new recording can begin. This value ranges from 10s to 300s.
Alarm Out
Check the box to enable the external alarm when the event triggers. In the boxes to the immediate
right, enable which camera(s) will record when the event occurs.
DVR7800S-U Series Hybrid DVR User Guide
Figure 4-64
4 Web Service
206