ADT DVR7800S-U Series User Manual page 92

Hybrid Standalone DVR User Guide
Alarm Upload
Enable this feature to upload an alarm signal to the network.
Send Email
Enable this to send out email to alert you when the event occurs.
Record Channel
The system automatically activates the designated channel(s) to record once a Motion Detection event
occurs. Make sure you have set MD Record in Schedule screen (Main Menu > Setting > Storage >
Schedule) and Schedule Record on the Manual Record screen (Main Menu > Setting > Storage >
Record).
Delay
To avoid rerecording the same event, enter the number of seconds to wait after the event has ended
before a new recording can begin. This value ranges from 10s to 300s.
PTZ Activation
Select this feature to set Pan/Tilt/Zoom movement when an event occurs.
•
Select. Click this button to open the PTZ Activation screen for setting up the camera.
Tour
Enable the tour function to present an alternating display (much like a slideshow) of the channel(s)
you have set to record when a motion detect event occurs. Refer to section 3.7.2.2 TV Adjust
on page 114 for tour interval setup.
DVR7800S-U Series Hybrid DVR User Guide
Figure 3-39
3 Local Menu Operations
Tab
82