Table of Contents
Advertisement
Hybrid Standalone DVR User Guide
The PTZ Setup screen contains the following items:
Channel. Use the dropdown list to select the desired channel number. Make this channel
selection first.
PTZ Type: Use the dropdown list to select Local mode if you are connecting to the Speed
dome (PTZ) via RS485 cable. Select Remote mode if you are connecting to a network PTZ
camera.
Protocol. Select corresponding PTZ protocol (such as Pelco D)
Address: Input corresponding PTZ address. The default address is 1.
Baud rate: Select corresponding baud rate. The default value is 9600.
Data bits: select corresponding data bits. The default value is 8.
Stop bits: select corresponding stop bits. The default value is 1.
Parity: Select from three options: odd, even or none. The default setup is none.
3. After completing all the settings, click the Save button.
The system reverts to the previous menu.
3.7.5.3 PTZ Menu
In one window display mode, right mouse-click and select PTZ from the Shortcut Menu, or press the
Fn button on either the front panel or on the remote.
DVR7800S-U Series Hybrid DVR User Guide
Figure 3-76
3 Local Menu Operations
120
Advertisement
Table of Contents
