Table of Contents
Advertisement
Hybrid Standalone DVR User Guide
The blue zone is the armed (motion detection) zone; the clear zone is the disarmed zone. The
system only detects motion in the blue armed region. The default setup is the entire screen
(all blue).
5. Set the motion detection zone, using one of the following methods. The currently selected grid
cell is highlighted in green.
a. Left mouse-click and drag it to set the desired region. If the area is already blue (armed),
dragging the mouse sets the cells clear (disarmed). If the area is already clear (disarmed),
dragging the mouse sets the cells armed (blue).
or
b. Press the Fn button on the front panel to switch between the armed mode and disarmed
modes. Use the arrow keys to apply that format to the grid cell.
6. After setting the zone, exit and return to the Detect zone setup screen, using one of the
following methods:
a. Right mouse-click
or
b. Press the Enter button on the front panel
7. Set the Sensitivity level 1-6, where 6 is the most sensitive. The default is 3.
8. Select the Test button. A screen appears as in Figure 3-41. The system only displays the
motion detect status of the blue area. The red flashing area shows motion has been detected
in this area.
DVR7800S-U Series Hybrid DVR User Guide
Figure 3-40
3 Local Menu Operations
84
Advertisement
Table of Contents
