Pan/Tilt/Zoom (Ptz) Panel - ADT DVR7800S-U Series User Manual

Hybrid Standalone DVR User Guide

4.4.4 Pan/Tilt/Zoom (PTZ) Panel

Before initiating the Pan/Tilt/Zoom (PTZ) operation, make sure that you have properly set the PTZ
protocol. Refer to the section titled PTZ on page 234.
There are eight direction keys. In the middle of the eight direction keys, there is a 3D intelligent
positioning key. When you click the 3D intelligent positioning key, the system reverts to the single
screen mode. Drag the mouse in the screen to adjust section size. PTZ initiates automatically.
3D Intelligent
Positioning Key
Click here to
display or hide PTZ
control platform.
Setup PTZ using selections from the dropdown menu.
Scan
1. Select Scan from the dropdown list. The Scan buttons appear.
2. Click the Set button. The Set Left and Set Right buttons to set the scan left and right limits:
a. Use the direction buttons to move the camera to the desired location and then click the left
limit button.
b. Move the camera again and then click the right limit button to set the right limit.
DVR7800S-U Series Hybrid DVR User Guide
4 Web Service
152