ADT DVR7800S-U Series User Manual page 188

Hybrid Standalone DVR User Guide
Sender
Sender email address.
Authentication (Encryption mode)
Select SSL, TLS or NONE.
Subject
Input email subject here.
Attachment
Check the box to send out the email of the snapshot picture.
Receiver
Enter the destination (receiver's) email address (maximum of three addresses. This supports SSL and
TLS email boxes.
Interval
The send interval ranges from 0 to 3600 seconds. 0 means there is no interval.
The system will not send out the email immediately when the alarm occurs. When the Motion
Detection or the Abnormality event activates the email, the system sends out the email according to
the interval you have specified here. This function is very useful when there are too many emails
activated by the Abnormality events, which may result in heavy load for the email server.
Health Mail Enable
Check the box to enable this function.
Update Period (Interval)
This function enables the system to send out a test email for checking the connection. Check the box
to enable this function and then set the corresponding interval. The system can send out the email
regularly as you set here.
Email Test
The system will automatically send out an email once to verify that the connection is OK. Save the
email setup information before performing the email test.
DVR7800S-U Series Hybrid DVR User Guide
4 Web Service
178