Table of Contents
Advertisement
Hybrid Standalone DVR User Guide
3.5.1.2 Video Loss
This function informs you when no video signal is detected.
To set up a Video Loss event:
1. Open the Motion Detect screen by selecting Main Menu > Setting > Event > Detect. The
Detect screen opens.
2. Select the Video Loss tab.
3. In the Channel area, select the channel you want to set up from the dropdown list.
4. Check the Enable checkbox to enable the Video Loss feature for this channel.
5. In the Period area, select the Setup button. The Setup dialog opens for setting the motion
detection period.
DVR7800S-U Series Hybrid DVR User Guide
Figure 3-44
3 Local Menu Operations
87
Advertisement
Table of Contents
