ADT DVR7800S-U Series User Manual page 184

Hybrid Standalone DVR User Guide
4.7.2.5 PPPoE
To set up PPPoE:
1. Check the Enable box to enable the PPPoE feature.
2. Input the PPPoE User Name and Password you get from the Internet Service Provider.
3. Click Save.
4. Reboot the device.
The DVR connects to the internet via PPPoE after reboot. You can get the IP address from the WAN in
the IP address column.
Note: You must use the previous IP address in the LAN to login the device. Go to the IP address
item to see the current device information. You can access the client end via this new
address.
4.7.2.6 DDNS
The DDNS page is used to connect various servers so that you can access the DVR via the server.
Requirements: You must have a PC with a fixed IP and DDNS software running. In other words, this
PC is a DNS (domain name server).
To set up DDNS:
1. Go to the corresponding service Website to apply for a domain name.
2. Access the system via the domain. It works even if your IP address has changed.
3. Select DDNS from the dropdown list.
DVR7800S-U Series Hybrid DVR User Guide
Figure 4-25
4 Web Service
174