Table of Contents
Advertisement
Hybrid Standalone DVR User Guide
After completing the settings, click the Save button. The system returns to the previous menu.
Tip: On the navigation bar, click
3.7.2.4 Zero Channel Encoding
This function enables the Zero Channel Encoding function so that you can view several video sources
on one channel.
Enable. This function is disabled by default. Check the box to enable this function.
Compression. The system default setup is H.264. You can set according to the device capability.
Resolution. The resolution value may vary due to different device capabilities. Make your selection
from the dropdown list.
Frame Rate. The frame rate value may vary due to different device capabilities. Please select from
the dropdown list.
Bit Rate. The bit rate value may vary due to different device capabilities and frame rate setups.
Please select from the dropdown list.
Save. Click to save the current setup. If this function is disabled, you cannot operate Zero Channel
Encoding function.
DVR7800S-U Series Hybrid DVR User Guide
/
to enable/disable Tour. Click Save to save the current setup.
Figure 3-72
3 Local Menu Operations
116
Advertisement
Table of Contents
