Table of Contents
Advertisement
Hybrid Standalone DVR User Guide
Checkboxes
Alarm Upload. If enabled, the alarm signal is uploaded to the network.
Send Email. If enabled, an email alert is sent to you when an alarm occurs.
Buzzer. If enabled, a buzzer sounds when an alarm occurs.
Message. If a 3G network is connected, a message is sent when a motion detection event
occurs. Note: This feature is not supported by ADT.
Log. If enabled, a log is created for the event.
4.7.3.2 Alarm
This area provides you with the opportunity to set up and activate various alarms. Select from these
setup tabs: Local Alarm, Net Alarm, IPC External Alarm and IPC Offline Alarm.
Local Alarm
The system detects the alarm signal from the local alarm input port.
Enable
Check the box to activate the Alarm function, and then select the channel number from the
dropdown, or else select All.
Alarm Name
Assign a nickname for the specified alarm.
DVR7800S-U Series Hybrid DVR User Guide
Figure 4-60
4 Web Service
202
Advertisement
Table of Contents
