ADT DVR7800S-U Series User Manual page 93

Hybrid Standalone DVR User Guide
Snapshot
Enable this function to take a snapshot image when a motion detect event occurs.
Video Matrix
Check the box to enable this function. When an event occurs, the device connected to the SPOT OUT
port on the rear of the DVR displays video output from the selected channel in a 1-window tour. See
3.7.3 Video Matrix on page 117 for details on how to set up Video Matrix.
Buzzer
Enable this function to sound an audible tone from the DVR when the alarm occurs.
Voice Prompts
Enable this function to sound a preselected audio file when the event occurs. Refer to Section 3.7.7
Voice on page 131 for details on how to set up Voice Prompts.
Test
Click this test the current motion detect setup. See section 3.5.1.1 Motion Detection on page 83.
Note:
•
In the Detect main screen, the copy/paste function is only valid for the same event type. In
other words, you cannot copy a channel setup in Video Loss mode and paste it to a channel
in Masking mode.
•
The Default function is only available for the current event type. For example, if you click the
Default button in the Masking dialog, only the default Masking setup is restored to default
settings. It does not affect other detection types.
3.5.1.1 Motion Detection
The system can set a Motion Detection event to trigger an alarm and initiate recording. The Motion
Detect icon appears on the live video screen if the current channel has the motion detect alarm
enabled. You first must set up the area on the screen that you want to be sensitive to motion
detection. You can up the motion detection zone using the mouse. You can also use keys on the front
panel of the DVR: FN and arrow keys to set the detection zone, the Enter key to accept the setting, or
the Esc key to exit without saving.
To set up Motion Detection:
1. Open the Motion Detect screen by selecting Main Menu > Setting > Event > Detect > Motion
Detect. The Motion Detect screen opens, as shown in Figure 3-38.
2. In the Channel area, select the channel you want to set up from the dropdown list.
3. Check the Enable checkbox to enable the Motion Detection feature for this channel.
4. In the Region field, select the Select button. An interface opens for setting the motion
detection zone.
DVR7800S-U Series Hybrid DVR User Guide
3 Local Menu Operations
83