Storage Screen; Figure 33 - Storage Screen - ADT A-ADRP4E-120 User Manual

Storage Screen

Highlight Storage in the Main menu and press the
appears. The DVR displays the storage status when the installed IDE hard disk drives support
the S.M.A.R.T. (Self-Monitoring Analysis and Reporting Technology) monitoring program.
NOTE: When the DVR has more than four storage devices, you can scroll through the
list by selecting the Up and Down arrow buttons under the list.
The Type field displays the type and capacity of storage devices.
The Status field displays "Good", "Bad", "S.M.A.R.T. Not work", "S.M.A.R.T. Alert", "High
Temperature" or "Not installed, depending on storage conditions.
• Good — The storage condition is normal.
• Bad — Data cannot be written on or read from the storage device.
• S.M.A.R.T. Not work — Storage conditions are normal, however, the S.M.A.R.T.
monitoring is not working or supported
• S.M.A.R.T. Alert — S.M.A.R.T. monitoring has detected a fault condition.
• High Temperature — S.M.A.R.T. monitoring has detected that the temperature of storage
device exceeded the preset temperature threshold.
• Not installed — The storage device is not installed.
NOTE: Once the "S.M.A.R.T. Alert" message displays, replacing the hard disk drive is
recommended, usually within 24 hours.
NOTE: When the USB storage device is used for clip copy, storage size and status will
not be displayed in the Storage screen.
Figure 33 — Storage screen.
Digital Video Recorder
button. The Storage setup screen
25