When PID output frequency is larger than the frequency for sleep start the inverter will be awaked and
enter PID awake mode. The time diagram is as follow:
Parameter Group 13 - Communication mode
13-0: : : : Assigned Communication Station Number: : : : 1 - 254
13-0: to set the communication station codes which are suitable for driving more than one inverters
situations.
13-1: : : : Baud Rate setting (bps): : : : 0000: 4800
13-2: : : : Stop Bit Selection: : : : 0000: 1 stop bit
13-3: : : : Parity Selection : : : : 0000 : no parity
13-4: : : : Data Format Selection: : : : 0000 :8 bit data
1.RS-485 Communication :
(1)1 vs 1 Controlling : to control one inverter by a PC or PLC or controller.(set 13-0 = 1~254)
0001: 9600
0002: 19200
0003: 38400
0001: 2 stop bit
0001 : even parity
0002 : odd parity
0001 :7 bit data
4-52
Chapter 4 Software Index