Chapter 1 Safety Precautions; Before Power On - GE VAT200 Quick Start Manual

1.1 Before Using the Product

1.1.1 Before Power ON

The line voltage applied must comply with the inverter's specified input voltage.
Make sure the main circuit connections are correct. L1(L), L2 and L3(N) are power-input
terminals and must not be mistaken for T1, T2 and T3. Otherwise, the inverter might be
damaged.
To avoid the front cover from disengaging, do not pull the cover during handling for
the heat sink should be fallen off. Accident falling down will damage the inverter or
injure to person, which should be avoided.
To avoid the risk of fire, do not install the inverter on a flammable object. Install it on
nonflammable object such as metal.
If several inverters are placed in the same control panel, add extra heat sink to keep
the temperature below 40 to avoid overheat or fire.
When removing or installing the operator, turn OFF the power first, and manipulate
the operator following the instruction of the diagram to avoid operator error or no
display caused by bad contact.
This is a product of the restricted sales distribution class according to IEC 61800-3. In a
domestic environment this product may cause radio interference in which case the user
may be required to take adequate measures.

Chapter 1 Safety Precautions

Caution
Danger
Caution
Warning
1-1
Chapte 1 Safety Precautions