GE VAT200 Quick Start Manual page 64

Reference Source 2： ： ： ：
5-11 Auxiliary frequency source can be selected
When frequency source command setting as impulse command , ( 1-06= 5 )
If master speed operating(5-00~5-06 setting to 16 and the terminal is OFF), frequency
running as impulse frequency.
If auxiliary speed operating (5-00~5-06 setting to 16 and the terminal is ON), frequency
should be decided by 5-11 setting.
Ex. The action process refer to below:
5-11= 0, frequency refer to 6-00.
5-11= 1, frequency refer to the VR analog signal on the Keypad.
5-11= 2, frequency refer to the VR analog signal on TM2.
5-11= 3, frequency refer to the frequency value which is calculated by Up/Down on TM2.
5-11= 4, frequency refer to the input communication frequency.
4-38
Chapter 4 Software Index