Openvms Axp Initial Startup Display - Digital Equipment DEC 3000 500X AXP Owner's Manual

If your system has the OpenVMS AXP operating system factory-
OpenVMS AXP
Initial Startup installed, you will see a display similar to the one shown in
Figure 5–3 when you first turn on your system and after the
Screen
system startup messages are completed.
Figure 5–3 OpenVMS AXP Initial Startup Display
The OpenVMS AXP Factory Installed Software (FIS) procedure
OpenVMS AXP
that runs when you first start your system prompts you to
Startup Dialog
answer some questions, and then restarts your system. To get
help on any question, press
of the prompts. Follow the instructions on the screen to complete
the dialog.
Log In to Your After the OpenVMS AXP Factory Installed Software (FIS)
System procedure is complete, you can log in to your system by entering
the necessary information at the DECwindows Motif Start
Session screen, shown in Figure 5–4.
Starting a System with Factory-Installed Software
+--------------------------------------------------------------------+
| OpenVMS Operating System
|
| Factory Installed Software Procedure
+--------------------------------------------------------------------+
Welcome to the OpenVMS Factory Installed Software (FIS) procedure.
Please wait while the FIS procedure initializes the system. This will
take between one and five minutes, depending on the type of computer.
System initialization continuing, please wait...
System initialization continuing, please wait...
System initialization continuing, please wait...
and press the Return key at any
?
Starting Up the System 5–9
|
|
|