The Test Command - Digital Equipment DEC 3000 500X AXP Owner's Manual

The test Command

The test Command
Command The
Description components listed in Table 8–6:
Table 8–6 Diagnostic Tests
Test Name
ASIC
MEM
NVR
CXT
SCC
NI
SCSI
ISDN
TCn
1
Issue the
Command
Syntax
>>> test component
where component is any of the components listed previously. If
you issue the
system will test all components. For more information about the
test
8–16 Using Console Commands
command lets you run diagnostic tests on the
test
Device Tested
Application-specific integrated circuit
Memory
Non-volatile RAM
Integral two-dimensional graphics
Serial communications controller
Network interface (Ethernet)
SCSI device(s)
1
79C30A AMD chip
TURBOchannel options, where n is the number of
the TURBOchannel device you wish to test
Running ISDN diagnostic tests also tests the audio port
command as follows:
test
Return
command without specifying a component, the
test
command, see Chapter 13.