The Continue Command; The Halt Command - Digital Equipment DEC 3000 500X AXP Owner's Manual

The continue Command

Description The
level after console mode has been invoked.
This command is not applicable for systems running the DEC
DEC OSF/1
OSF/1 AXP operating system. You can halt the system, enter
AXP Operating
System console commands, and then return to program mode using the
continue
operating system.
Issue the
Command
Syntax
>>> continue
Your operating system should resume execution after you enter
this command, providing that the contents of memory used
by the operating system have not been altered or corrupted.
Commands that can corrupt or alter system memory include the
test

The halt Command

Description The
associated with this command.
command returns the system to operating system
continue
command only on systems running the OpenVMS AXP
command as follows:
continue
Return
, , and commands.
init deposit
command halts the system. There are no parameters
halt
The continue Command
Using Console Commands 8–11