Completing The Network Connection - Digital Equipment DEC 3000 500X AXP Owner's Manual

Setting and Verifying the Network Connection
If there is an error message, check to make sure the cable is
connected securely to the system unit, or see Chapter 12 for
more information.
Restarting Your To restart your operating system, enter the
Operating console prompt as follows:
System
>>> boot
This is the default command to start your operating system from
the disk that was shipped with your system.
If you have modified the default startup procedure by changing
the environment variables (described in Chapter 9), enter the
appropriate boot command for your system.

Completing the Network Connection

Once you determine that your network cables are connected
Contact Your
securely, and your system starts up and tests without errors,
Network
Administrator contact your network administrator to configure your DEC 3000
Model 500X AXP workstation as part of your network.
If your system displays any error messages during the startup
test, see Chapter 12 to determine the problem.
4–14 Connecting the System to a Network
Return
command at the
boot