Digital Equipment DEC 3000 500X AXP Owner's Manual page 53

Connecting the DEC 3000 Model 500X AXP Workstation
Attaching the universal strain relief strap to your monitor
Step 4: Attach
the Universal video cable can prevent the weight of the cable's junction block
from pulling the cables out of the connectors on the back of the
Strain Relief
monitor.
Strap
Attach the universal strain relief strap to the monitor video cable
by performing the following tasks:
1. Insert the three BNC connectors
2. Pull the video cable into the slotted hole at the bottom end of
3. Align the green (G) BNC connector with the two keyslots of
Figure 3–5 shows a universal strain relief strap properly
attached.
3–8 Installing the System
of the video cable through the center slot of the universal
strain relief strap , making sure the strap is under the
cable junction block.
the universal strain relief strap. Bring the strap flush with
the cable junction block.
the closed hole at the top end of the universal strain relief
strap, and snap the BNC connector into the hole.
and cable junction block