Openvms Axp And Dec Osf/1 Axp Device Naming Conventions - Digital Equipment DEC 3000 600 AXP Service Information

BOOT Command Parameters
Table 13–1 OpenVMS AXP and DEC OSF/1 AXP Device Naming
OpenVMS AXP
Convention
dd
i
u
nn
For example, a disk device on SCSI controller A with a SCSI ID
of 4 and an LUN of 0 would have the following OpenVMS AXP
device naming convention:
Qualifiers -fl <value>
ASCII string up to 23 characters.
-fi <filename>
Used when booting across a network device to specify the name
of a file to load into the operating system. The filename is
limited to 23 characters. Note that the filename must be in
quotes.
13–4
Conventions
DEC OSF/1 AXP
Convention
dd
i
u
DKA600
BOOT commands can either be in OpenVMS AXP or
DEC OSF/1 AXP format when the system is operating
under either OpenVMS AXP or DEC OSF/1 AXP. Two
command syntaxes are available so as to match the
current OpenVMS AXP and DEC OSF/1 AXP syntaxes.
Description
Device name identifier
Designates SCSI
controller (A/B)
Designates SCSI ID
number
Logical unit number is
always 00; LUN must
be two digits
Note