Changing The Default Startup Action (Auto_Action) - Digital Equipment DEC 3000 500X AXP Owner's Manual

Changing the Default Startup Action (auto_action)

The default setting for the
Default Setting
depends on whether your system is preconfigured at the factory
with factory-installed software. All preconfigured systems are
set to BOOT, all other systems are set to HALT.
To set the
Command
Syntax command:
>>> set
Enter the parameter of your choice from Table 9–2 to set the
default startup action.
This command sets the default startup action to halt at the
Command
Example console prompt each time your system is turned on. The system
responds with a confirmation of the action you have chosen.
>>> set auto_action 3
AUTO_ACTION = HALT
>>>
9–6 Changing Environment Variables
environment variable, enter the following
auto_action
auto_action
parameter
Return
Return
environment variable
auto_action