Digital Equipment DEC 3000 500X AXP Owner's Manual page 129

Table 9–1 Environment Variables
Variable Description
auto_action Specifies the action the console should take any
time the system is turned on.
bootdef_dev
Sets the default boot device.
boot_osflags Sets the boot flags. This environment variable is
usually operating system-dependent.
boot_reset
Determines whether the system should be reset
before attempting to boot.
diag_loe Determines whether the diagnostic test loop-on-
error flag is set. This is available for loadable
diagnostics only.
diag_quick
Sets the diagnostic startup mode to normal or fast
startup testing.
diag_section
Sets the diagnostic operating environment. (Used
by Digital Services.)
enable_audit Sets whether console audit messages are displayed
during the boot process.
ethernet
Sets the Ethernet type for the system, either
THICK or TENBT.
language Sets the console keyboard mapping to a supported
language.
mop
Sets the Ethernet network listener during console
mode.
password Sets the password to enable the password security
feature.
radix Sets the default input radix to a specified value.
scsi_a
Sets the host ID number for the SCSI_A port.
scsi_b Sets the host ID number for the SCSI_B port.
scsi_reset Sets the time to wait to reset the SCSI device before
booting.
secure
Sets the password security feature.
server Sets the system to server status, thus determining
which startup tests are performed.
trigger
Sets the remote trigger to On or Off.
Available Environment Variables
Default
BOOT
{null}
0, 0
ON
OFF
OFF
1
ON
THICK
English (3)
ON
No password
0 (Hexadecimal)
7
7
4
OFF
ON for DEC 3000 Model
500X AXP server
OFF
Changing Environment Variables 9–3