Table of Contents
Advertisement
When you press the halt button, you may see a system halt
System Halt
Display
message similar to the one shown in Figure 6–3.
Figure 6–3 System Halt Message
>>>
This message indicates that the halt button has been pressed. It
does not signify an error. Note that a halt message is not always
displayed.
If you have halted your system to access console commands, you
can continue now.
Screen Display
If you press the halt button on a workstation system running
DECwindows Motif with the OpenVMS AXP operating system,
When You Halt
the console prompt appears in the top left-hand corner of the
a Workstation
screen. Approximately four lines of console information are
displayed at a time. The remainder of the screen continues to
display the DECwindows Motif session.
You can use only the following commands when your system is
Console
halted while running the OpenVMS AXP operating system:
Commands You
Can Issue
•
•
•
•
•
•
•
•
•
Using other console commands may affect memory contents
and thus prevent the system from being able to return to the
operating system.
?02 EXT HLT
PC= 00000000.20000000 PSL= 00000000.00001F00
continue
, to exit from console mode and return to the
operating system
help
help advanced
help mips_emulator
help set
help show
printenv
set
show
Halting the System
Turning Off the System 6–7
Advertisement
Table of Contents
