Configuration Display - Digital Equipment MicroVAX 3100 85 Troubleshooting And Diagnostics Information

1.3.4 Configuration Display
The configuration display shows the system configuration and the error messages
that were detected while the most recent power-up tests, diagnostic tests, and
utilities were running. If you add expansion boxes to the system and do not run
the power-up tests or appropriate diagnostic test or utility, the configuration
display does not recognize the reconfiguration. Enter the following command to
see the configuration display:
>>> SHOW CONFIG
If the system does not detect any errors in the most recent power-up tests
or diagnostic utilities, it responds with a configuration display similar to the
following:
KA55-A or KA51-A V2.3, VMB 2.14
08-00-2B-33-CF-C9
80MB
¡ ¢
TstNbr DevNam Info
------ -------- --------------------------
0 CPU_BD OK
A8 MEM OK
E4 DZ OK
E0 SCSI OK
3-RZ24L
5F NI OK
F0 SCSI_B OK
0-RZ23L
0 QBUS OK
E8 COMM OK
DSW41/42 2 CHANNEL V4.10-7b
EC ASYNC OK
DHW41/2 V1.6
Test Utility Number Column
Device Mnemonic Column
¡
Device Status Column
¢
SCSI IDs and SCSI Device Names
£
The test numbers listed identify the normal test or script number to run to verify
the device listed. There are additional tests and utilities for some devices. Test 0
calls the power-up script.
1–22 Troubleshooting and Diagnosing Problems
6-Adapter 7-RRD43
£
6-Adapter