Connecting The Dec 3000 Model 500X Axp Workstation; Attaching The Ethernet Loopback Connector - Digital Equipment DEC 3000 500X AXP Owner's Manual

Connecting the DEC 3000 Model 500X AXP Workstation

Attach the Ethernet loopback connector to the AUI Ethernet
Step 1: Attach
port on the system unit, as shown in Figure 3–2. If you plan to
the Ethernet
Loopback connect to an AUI Ethernet network or a ThinWire Ethernet
Connector network using a DECXM transceiver (or a DESTA unit), you
may omit this step. After you have completed the connections
in this chapter, see Chapter 4 for information about network
connections.
Figure 3–2 Attaching the Ethernet Loopback Connector
Connecting the DEC 3000 Model 500X AXP Workstation
IS D N
S3
4
1
H z
0
MLO-007543
Installing the System 3–5