Table of Contents
Advertisement
Table 5–2 describes the startup display in more detail.
Table 5–2 Startup Display Information
Item
CPU
ASIC
MEM
NVR
CXT
SCC
NI
SCSI
ISDN
TC0
Startup Errors
If you see any error messages on the startup display screen, see
Chapter 12 for more information.
Description
Lists the revision level of the system board, the firmware
revision numbers and the type of processor.
Status of the two application-specific integrated circuits
(ASICs), one on the system board and one on the I/O board.
Total amount of memory and its status.
Status of non-volatile RAM and time of year (TOY) component.
Status of the integral two-dimensional graphics.
Status of the Serial Communication Controller, which includes
the keyboard and mouse tests.
Status of the Ethernet network interface(NI).
Status of SCSI bus.
Status of ISDN/Audio chip.
Status of TURBOchannel device(s). There are five
TURBOchannel slots available, 0, 1, 2, 3, and 4. This example
indicates one TURBOchannel device installed in slot 0.
Reviewing the Startup Display
Starting Up the System 5–7
Advertisement
Table of Contents
