Forgetting The Password; Steps To Access System - Digital Equipment DEC 3000 500X AXP Owner's Manual

Forgetting the Password

Forgetting the Password
Erase the If you forget your password, you must complete the steps in
Current Table 10–5 to erase your password and regain access to your
Password system.
Table 10–5 Steps to Access System
Step
1
2
Entering To erase the current password, enter the
the deposit the exact parameters shown. There is no system response to this
Command deposit
>>> deposit /u/q-n:2 1E0200088 0
Once your password is erased, you can enter a new password
as explained in the section Entering a Password earlier in this
chapter.
10–8 Using the Password Security Feature
Description
Make sure the secure system jumper is in the disabled
position. See Chapter 13 for information on how to
contact your Digital service representative to have him
perform this task.
Enter the command as explained in the next
deposit
section.
command.
command with
deposit
Return