System Device Errors - Digital Equipment DEC 3000 500X AXP Owner's Manual

Interpreting the show Command Display
The show error The
Command error that is occurring within your DEC 3000 Model 500X AXP
system.
Table 12–11 lists the devices that the
provides information about.
Table 12–11 System Device Errors
Test Name
ASIC
MEM
NVR
CXT
SCC
NI
SCSI
ISDN
TCn
1
Error information about TURBOchannel devices is not displayed
by the
500X AXP Service Documentation Kit for error information on
TURBOchannel devices.
12–18 Identifying a Problem
command displays specific information about any
show error
Device Tested
Application-specific integrated circuit
Memory
Non-volatile RAM
Integral two-dimensional graphics
Serial communications controller
Network interface (Ethernet)
SCSI device(s)
1
79C30A AMD chip
TURBOchannel options, where n is the number of
the TURBOchannel device you wish to test
Running ISDN diagnostic tests also tests the audio port
command. Refer to the DEC 3000 Model
show error
command
show error