Table of Contents
Advertisement
Figure 13–3 Initializing Your System
>>> init
INIT-S-CPU...
INIT-S-RESET_TC...
INIT-S-ASIC...
INIT-S-MEMO...
INIT-S-NVR...
INIT-S-CXT...
INIT-S-SCC...
INIT-S-NI...
INIT-S-SCSI...
INIT-S-ISDN...
>>>
If the problem with your system has been fixed, after you
initialize your system, you should be able to issue the
config
display.
Note: Another
You can also initialize your system after running diagnostic tests
Way to Initialize
by running the same test again. If the problem has been fixed,
Your System
the test, which failed before, will complete successfully.
Figure 13–4 shows a sample display of a successful SCC test.
Figure 13–4 Initializing the System with the SCC Test
>>> test scc
T-STS-SCC-OK
>>>
Return
command and not see any errors listed in the screen
Running Diagnostic Tests
show
Running Diagnostic Tests 13–7
Advertisement
Table of Contents
