Wheel Bearing Inspection; Axle Inspection - Honda V65 MAGNA Shop Manual

~HONDA.
~ V65MAGNA
WHEEL BEARING INSPECTION
FRONT WHEEL/SUSPENSION
Check wheel bearing play by placing the wheel in
a truing stand and spinning the wheel by hand.
Replace the bearings with new ones if they are noisy
or have excessive play.
SERVICE LIMIT: 0.03 mm (0.001 in)
PLAY
WHEEL INSPECTION
Check the rim runout by placing the wheel in a
truing stand. Turn the wheel slowly and read the
runout using a dial indicator.
SERVICE LIMITS:
RADIAL RUNOUT: 2.0 mm (0.08 in)
AXIAL RUNOUT: 2.0 mm (0.08 in)
NOTE:
The wheel cannot be repaired and must be
replaced with a new one if the service limits
are exceeded.
AXLE INSPECTION
Set the axle in V blocks and measure the runout.
SERVICE LIMIT: 0.2 mm (0.01 in)
Date of Issue: Dec, 1982
©
HONDA MOTOR CO., LTD.
241
15.. 17