V65MAGNA
GEARSHIFT LINKAGE
Assemble the gearshift spindle and return spring and
install as shown.
RETURN SPRING
GEARSHIFT SPINDLE
Install the washer, drum stopper arm, collar, spring,
washer and nut over the arm bolt.
Tighten the nut securely.
Rotate the gearshift spindle and check the linkage
for smooth operation.
Install the oil pump drive sprocket washer on the
shaft.
Install the oil pump drive and driven sprockets
with drive chain and tighten the driven sprocket
bolt securely.
NOTE:
The driven sprocket has an "IN" mark that
must face the crankcase.
Install the clutch assembly and cover (section 7).
DRUM STOPPER ARM
01 L PUMP DRIVE CHAIN
DRIVE SPROCKET
DRIVEN SPROCKET
BOLT
Date of Issue: Dec,
1982
© HONDA MOTOR CO., LTD.
121
8-5