Radiator/Cooling Fan - Honda V65 MAGNA Shop Manual

COOLING SYSTEM
Connect the housing to the hoses and tighten the
hose bands.
Secure the thermostat housing to the air chamber
with the bolt attaching the ground wire terminal
at the same time.
Connect the temperature sensor wire to the sensor.
Install the right air chamber cover.
Fill the cooling system (page 6-3).
AIR CHAMBER GROUND WIRE
TEMPERATURE SENSOR
WIRE
RADIATOR/COOLING FAN
REMOVAL
Remove the seat and raise the fuel tank after mak-
ing sure that the tank is less than half full.
Remove the drain plug and drain the coolant (page
6-3).
Loosen the radiator side cover attaching bolts and
nuts and remove the side covers and grille.
Remove the left steering head cover attaching nut
and cover.
Disconnect the fan motor coupler.
THERMOSTAT HOUSING
BOLT RADIATOR GRILLE
RADIATOR SIDE COVER NUT
LEFT STEERING HEAD COVER FAN MOTOR COUPLER
NUT
6-6
82
Date of Issue: Dec, 1982
©
HONDA MOTOR CO., LTD.