Honda V65 MAGNA Shop Manual page 302

~
V65MAGNA
INSTALLATION
Apply grease to the brake pedal shaft and install it
in the frame.
Hook the brake return spring correctly.
Connect the pedal shaft to the master cylinder push
rod end and install the joint pin. Secure the joint
pin with a new cotter pin.
Install the brake pedal aligning the punch marks on
the shaft and pedal.
Tighten the brake pedal bolt.
TORQUE: 24-30 N·m (2.4-3.0 kg·m, 17-22 ft·lb)
Hook the brake light switch spring.
HYDRAULIC BRAKES
PUNCH MAR KS
BRAKE LIGHT
SWITCH SPRING
Date of Issue: Dec, 1982
©
HONDA MOTOR CO., LTD.
301
1
.. 1 7