Honda V65 MAGNA Shop Manual page 216

V65MAGNA
DRIVE TRAIN
BREATHER HOLE CLEANING
BREATHER CAP CASE CASE COVER
Remove the breather hole cap and blow through the
breather hole with compressed air.
PINION GEAR ASSEMBLY
Install the original pinion gear spacer.
NOTE:
When the gear set, pin ion bearing and/or gear
case has been replaced, use a 2.0 mm thick
spacer.
PINION BEARING PINION SPACER
Press the bearing onto the pinion gear shaft with the
special tools shown.
Install a new a-ring over the pinion shaft.
DRIVER DRIVER
07746-0030100 OR 07945-3710200
Date of Issue: Dec, 1982
© HONDA MOTOR CO., LTD.
ATTACHMENT, 25 mm 1.0.
077 46-0030200
215
a-RING
14-11