Pilot Screw - Honda V65 MAGNA Shop Manual

FUEL SYSTEM
Inspect the float valve seat and filter for grooves,
nicks or deposits.
ASSEMBLY
Assemble the float chamber components in the
reverse order of disassembly.
PILOT SCREW
REMOVAL
NOTE:
The pilot screws are factory pre-set and
should not be removed unless the carbure-
tors are overhauled.
The pilot screw plugs are factory installed
to prevent pilot screw misadjustment. Do
not remove the plugs unless the pilot
screws are being removed.
Cover all opening with tape to keep metal
particles out when the plugs are drilled.
FILTER
V65MAGNA
VALVE SEAT
Center punch the pilot screw plug to center the
drill point.
Drill through the plug with a 4 mm (5/32 in) drill
bit, being careful not to drill into the pilot screw.
CAUTION:
Be careful not to drill into the pilot screw.
All pilot screws must be replaced even if only
one requires it for proper pilot screw adjust-
ment (page 4-16).
4 .. 8
56
Date of Issue: Dec, 1982
©
HONDA MOTOR CO., LTD.