Crankcase Disassembly - Honda V65 MAGNA Shop Manual

CRANKCASE
CRANKCASE DISASSEMBLY
Remove the upper crankcase bolts. Refer to service
Information General (page 11-1) for removal of
necessary parts before disassembling crankcase.
Remove the mainshaft bearing holder by removing
the screw and bolts.
Remove the output gear case mounting bolts and
output gear case.
Measure the th ickness of the output gear case
gasket and note it.
NOTE:
Whenever removing the output gear case,
perform output gear case gasket selection,
if not measured right away.
Index the bearing holder to the case for
ease of reinstallation.
Remove the gearshift indicator switch.
V65MAGNA
MAINSHAFT BEARING HOLDER
GEARSHIFT INDICATOR SWITCH
SIDE GEAR CASE
158
Date of Issue: Dec, 1982
© HONDA MOTOR CO., LTD.